Providing comprehensive insights into dynamic changes of the cerebrovascular structure and function in vivo, this technique opens new opportunities for mechanistic studies of acute brain diseases or responses to various stimuli.We investigated the frequency bandwidth, autocorrelation function, and complexity of chaotic temporal waveforms in unidirectionally coupled semiconductor lasers with time-delayed optical feedback. The effective bandwidth, peak value of autocorrelation function, and maximum Lyapunov exponent were simultaneously optimized by searching several control parameters of the laser systems based on multiobjective genetic algorithms. We found a conflicting relation between the effective bandwidth enhancement and the time-delay signature suppression, and a detailed relationship between the maximum Lyapunov exponent and the peak value of autocorrelation function.A peak output power of 29.6 W and an average output power of 8.5 W at a wavelength of 750 nm were demonstrated in quasi-CW multi-mode operation using an AlGaAs-based vertical external-cavity surface-emitting laser (VECSEL) diode-pumped at a wavelength of 675 nm. The comparatively low bandgap of the barrier material that was tuned to the pump-photon energy allowed a good compromise between low heat generation due to the quantum defect and strong absorptance of the pump radiation. The limitations for the average output power came mainly from insufficient heat flow from the intra-cavity heat spreader to the heat sink. These results show the potential for power scaling of diode-pumped VECSELs and the importance of effective heat removal.High-bandwidth GaN-based mini-LEDs on the c-sapphire substrate are promising candidates for underwater optical wireless communication (UOWC) systems due to their compatibility with the mature LED fabrication process. Here we fabricate and characterize mini-LEDs based on a single-layer InGaN active region with a peak emission wavelength around 484 nm for high-speed UOWC links. Since the LED diameter affects the trade-off between the modulation bandwidth and the optical modulation amplitude, mini-LEDs with varying mesa diameters from 100 µm to 175 µm are fabricated for the measurement. The 150 µm mini-LED with a 3-dB optical bandwidth of 906 MHz performs the best and enables the transmission of a net 4 Gb/s PAM-4 signal over 2 m of underwater distance using only linear equalization. This UOWC system has achieved, to the best of our knowledge, the highest net data rate and the highest data-rate-distance product based on a single-pixel mini-LED.The traditional angular spectrum method has an inherent problem that the region of diffraction propagation should be homogeneous. However, in some cases, the medium of the diffraction propagation region is inhomogeneous. In this Letter, based on iteration we proposed the non-uniform angular spectrum method for diffraction propagation calculation in a complex medium. By phase pre-processing in the spatial domain and diffraction calculation in the spatial frequency domain, the diffraction propagation problem of the light field in a complex medium is solved. Theoretical formulation and numerical examples as well as experimental investigation are presented to confirm the validity of the proposed method. The advantages of this method include faster computation, smaller memory requirement, and the ability to compute a larger area compared with the finite element method as well as the ability to compute the non-paraxial case compared with the standard fast Fourier transform beam propagation method.The breathing dissipative soliton as a dynamic solution to many nonlinear systems has induced substantial interest in nonlinear photonics and ultrafast laser science. However, the exotic breathing multi-soliton dynamics are still largely unexplored in the bidirectional fiber laser compared to the unidirectional laser. Here, we reveal nonequilibrium dynamics of a breathing soliton pair (BSP) with energy transfer in a bidirectional laser; in particular, the dissociation and annihilation of the BSP was triggered by control over intra-cavity polarization. Optical rogue waves were detected simultaneously, and the collision of breathers significantly increased the intensity of rogue waves, which is characteristic of the bidirectional laser. Further, the buildup dynamics of the BSP with nanosecond pulse separation and a breathing soliton molecule were observed. Multiple single soliton explosions and transient pulse splitting are distinct features of soliton molecule buildup compared to the soliton pair. These findings shed new insights into the multiple breather dynamics of nonlinear systems.We demonstrated broadband S-band (1460-1530 nm) amplification in Tm3+-doped fluorotellurite glass fibers (TDFTFs) by using a 1400/1570 nm dual-wavelength pump technique. TDFTFs based on TeO2-BaF2-Y2O3 (TBY) glass were fabricated by using a rod-in-tube method. For an input signal power of 0 dBm (or 1 mW), a broadband positive net gain ranging from 20 dB was ∼66 nm (1458-1524 nm), and the measured saturated output power was ∼24.84 dBm at 1490 nm. In addition, numerical simulation was performed by using the parameters of the TDFTFs and the pump lasers, and the noise figure was calculated to be less then 5.6 dB in the S band. Our results showed that the TDFTFs were promising gain media for constructing efficient broadband S-band fiber amplifiers.A femtosecond Mamyshev fiber oscillator in normal dispersion mode at 1 µm was started reliably and safely by an inexpensive diode-pumped passively Q-switched monolithic microchip laser emitting 300-ps pulses. Four-wave mixing spectral broadening is shown to play a pivotal role in starting the Mamyshev oscillator, owing to the random short and intense temporal fluctuations allowed by its ∼10-nm bandwidth. Systematic studies of the starting dynamics show that a success rate of 100% of the attempts is achieved with modest seed energy, as low as ∼30 nJ from the sub-nanosecond laser, corresponding to ∼100 pJ for the total four-wave mixing signal required to start the oscillation.In order to overcome the saturation of a single-photon avalanche diode (SPAD)-based receiver and keep the output counts at optimum level automatically, a new, to the best of our knowledge, scheme using the automatic attenuation control (AAC) technique is proposed. In the scheme, an AAC module is applied to attenuate excess incident photons. Furthermore, on the foundation of the bit error rate (BER) model of a photon-counting optical communication system, a reliable and efficient AAC algorithm is developed to compute the optimal attenuation factor. Based on the AAC algorithm, the optimal attenuation factors under different operation conditions are investigated. The results indicate that the incident optical intensity and signal-to-background ratio play an important role in determining the optimal attenuation factor. Moreover, at high incident optical intensity, the system BER utilized AAC module can be improved by 0.5 to 3 orders of magnitude. The AAC technique can effectively expand the dynamic range of the SPAD-based receiver.Using GaAs as a test material, we investigated the redshift between emission and the optical bandgap. The knowledge of the energy difference, referred to as the Stokes shift, is of considerable importance for solid-state light sources because its magnitude defines the centered monochromaticity of the emission. Employing Fan’s theory, we reveal the basic parameters, which determine the Stokes shift, and provide an uncertainty analysis, considering both uncorrelated and correlated variables. We disclose that the considerable scatter of the dielectric constants in the literature causes uncertainties comparable to or even exceeding the mean. The work stresses that the high-frequency and static dielectric constants might be closer than the currently promoted numbers.Reflection ptychography is a lensfree microscopy technique particularly promising in regions of the electromagnetic spectrum where imaging optics are inefficient or not available. This is the case in tabletop extreme ultraviolet microscopy and grazing incidence small angle x ray scattering experiments. Combining such experimental configurations with ptychography requires accurate knowledge of the relative tilt between the sample and the detector in non-coplanar scattering geometries. Here, we describe an algorithm for tilt estimation in reflection ptychography. The method is verified experimentally, enabling sample tilt determination within a fraction of a degree. Furthermore, the angle-estimation uncertainty and reconstruction quality are studied for both smooth and highly structured beams.Propagation-based phase-contrast x-ray imaging (PB-PCXI) generates image contrast by utilizing sample-imposed phase-shifts. This has proven useful when imaging weakly attenuating samples, as conventional attenuation-based imaging does not always provide adequate contrast. We present a PB-PCXI algorithm capable of extracting the x-ray attenuation β and refraction δ, components of the complex refractive index of distinct materials within an unknown sample. The method involves curve fitting an error-function-based model to a phase-retrieved interface in a PB-PCXI tomographic reconstruction, which is obtained when Paganin-type phase retrieval is applied with incorrect values of δ and β. The fit parameters can then be used to calculate true δ and β values for composite materials. This approach requires no a priori sample information, making it broadly applicable. Our PB-PCXI reconstruction is single-distance, requiring only one exposure per tomographic angle, which is important for radiosensitive samples. We apply this approach to a breast-tissue sample, recovering the refraction component δ, with 0.6-2.4% accuracy compared with theoretical values.Improving sensitivity is critical for the higher-order harmonic fiber Bragg grating sensors. check details To this aim, in this work, we have successfully introduced the phase-shift into the third harmonic fiber Bragg grating for tailoring a double-dip spectrum with a high finesse notch. The dual dips showed reversed responses for the intensity regarding the change of the temperature or axial strain, enabling a highly sensitive measuring regime using the intensity contrast between the two dips. Deduced from the sinusoidal responding curves, the highest temperature and the axial strain sensitivity could reach 0.964 dB/°C, and 0.0257 dB/μ ε, three-fold times the other intensity-based fiber sensors. This work may promote the higher-order harmonic gratings into applications for enriching wavelength utilization.We demonstrate the design, fabrication, and measurement of a switchable distributed Bragg reflector (DBR) that can be thermally switched from a close-to-zero reflective OFF state to a more than 70% reflection in its ON state. This is accomplished using a multilayer thin film stack using germanium (Ge) and the phase change material (PCM) Ge2Sb2Te5 (GST). The refractive indexes of Ge and GST in the amorphous state are closely matched, resulting in a nearly zero interface reflection. With appropriate antireflection coatings at the cavity ends, the overall reflection can be designed to be close to zero. When the GST is switched to the crystalline state, the refractive index contrast between the Ge and GST layers will increase dramatically contributing to the DBR reflection. Using this unique feature, we were able to design and experimentally demonstrate more than 70% reflection in the ON state and close to zero reflection in the OFF state at a wavelength of 2 µm.