-
Frederick Houston posted an update 6 days, 9 hours ago
The studied steel aged at 650 °C for 10 h shows a UTS of 1306 MPa and TE of 42%, resulting in the best product in terms of of UTS and TE, at 55 GPa·%. Such a value surpasses that of the previously reported medium-Mn steels containing equal mass fractions of various microalloying elements.In this novel study, we isolated 28 compounds from the leaves of Aquilaria sinensis (Lour.) Gilg based on a bioassay-guided procedure and also discovered the possible matrix metalloprotease 2 (MMP-2) and 9 (MMP-9) modulatory effect of pheophorbide A (PA). To evaluate the regulatory activity on MMP-2 and MMP-9, the HT-1080 human fibrosarcoma cells were treated with various concentrations of extracted materials and isolated compounds. PA was extracted by methanol from the leaves of A. sinensis and separated from the fraction of the partitioned ethyl acetate layer. PA is believed to be an active component for MMP expression since it exhibited significant stimulation on MMP-2 and proMMP-9 activity. When treating with 50 μM of PA, the expression of MMP-2 and MMP-9 were increased 1.9-fold and 2.3-fold, respectively. PA also exhibited no cytotoxicity against HT-1080 cells when the cell viability was monitored. Furthermore, no significant MMP activity was observed when five PA analogues were evaluated. This study is the first to demonstrate that C-17 of PA is the deciding factor in determining the bioactivity of the compound. The MMP-2 and proMMP-9 modulatory activity of PA indicate its potential applications for reducing scar formation and comparative medical purposes.The development of Multi-Target Directed Ligand is of clear interest for the treatment of multifactorial pathology such as Alzheimer’s disease (AD). In this context, acetylcholinesterase (AChE) inhibitors have been modulated in order to generate novel pleiotropic compounds targeting a second protein of therapeutic interest in AD. Among them, donecopride was the first example of a dual acetylcholinesterase inhibitor and 5-HT4 receptor agonist. In order to explore the structural diversity around this preclinical candidate we have explored the preparation of novel constrained analogs through late-stage rigidification strategy. A series of phenylpyrazoles was prepared in a late-stage functionalization process and all compounds were evaluated in vitro towards AChE and 5-HTRs. A docking study was performed in order to better explain the observed SAR towards AChE, 5-HT4R and 5-HT6R and this study led to the description of novel ligand targeting both AChE and 5-HT6R.Chitosan, industrially acquired by the alkaline N-deacetylation of chitin, belongs to β-N-acetyl-glucosamine polymers. Another β-polymer is hyaluronan. Chitosan, a biodegradable, non-toxic, bacteriostatic, and fungistatic biopolymer, has numerous applications in medicine. Hyaluronan, one of the major structural components of the extracellular matrix in vertebrate tissues, is broadly exploited in medicine as well. This review summarizes that these two biopolymers have a mutual impact on skin wound healing as skin wound dressings and carriers of remedies.Conductive fibers are essential building blocks for implementing various functionalities in a textile platform that is highly conformable to mechanical deformation. In this study, two major techniques were developed to fabricate silver-deposited conductive fibers. First, a droplet-coating method was adopted to coat a nylon fiber with silver nanoparticles (AgNPs) and silver nanowires (AgNWs). While conventional dip coating uses a large ink pool and thus wastes coating materials, droplet-coating uses minimal quantities of silver ink by translating a small ink droplet along the nylon fiber. Secondly, the silver-deposited fiber was annealed by similarly translating a tubular heater along the fiber to induce sintering of the AgNPs and AgNWs. selleck kinase inhibitor This heat-scanning motion avoids excessive heating and subsequent thermal damage to the nylon fiber. The effects of heat-scanning time and heater power on the fiber conductance were systematically investigated. A conductive fiber with a resistance as low as ~2.8 Ω/cm (0.25 Ω/sq) can be produced. Finally, it was demonstrated that the conductive fibers can be applied in force sensors and flexible interconnectors.
There is extreme heterogeneity in the available literature on the determination of R1 resection rate after pancreatoduodenectomy (PD); consequently, its prognostic role is still debated. The aims of this multicenter randomized study were to evaluate the effect of sampling and clearance definition in determining R1 rate after PD for periampullary cancer and to assess the prognostic role of R1 resection.
PD specimens were randomized to Leeds Pathology Protocol (LEEPP) (group A) or the conventional method adopted before the study (group B). R1 rate was determined by adopting 0- and 1-mm clearance; the association between R1, local recurrence (LR) and overall survival (OS) was also evaluated.
One-hundred-sixty-eight PD specimens were included. With 0 mm clearance, R1 rate was 26.2% and 20.2% for groups A and B, respectively; with 1 mm, R1 rate was 60.7% and 57.1%, respectively (
> 0.05). Only in group A was R1 found to be a significant prognostic factor at 0 mm, median OS was 36 and 20 months for R0 and R1, respectively, while at 1 mm, median OS was not reached and 30 months. At multivariate analysis, R1 resection was found to be a significant prognostic factor independent of clearance definition only in the case of the adoption of LEEPP.
The 1 mm clearance is the most effective factor in determining the R1 rate after PD. However, the pathological method is crucial to accurately evaluate its prognostic role only R1 resections obtained with the adoption of LEEPP seem to significantly affect prognosis.
The 1 mm clearance is the most effective factor in determining the R1 rate after PD. However, the pathological method is crucial to accurately evaluate its prognostic role only R1 resections obtained with the adoption of LEEPP seem to significantly affect prognosis.Background Oxidative stress is a key factor in the pathophysiology of many diseases. This study aimed to verify the antioxidant activity of selected plant phenolics in cell-based assays and determine their direct or indirect effects. Methods The cellular antioxidant assay (CAA) assay was employed for direct scavenging assays. In the indirect approach, the influence of each test substance on the gene and protein expression and activity of selected antioxidant enzymes was observed. One assay also dealt with activation of the Nrf2-ARE pathway. The overall effect of each compound was measured using a glucose oxidative stress protection assay. Results Among the test compounds, acteoside showed the highest direct scavenging activity and no effect on the expression of antioxidant enzymes. It increased only the activity of catalase. Diplacone was less active in direct antioxidant assays but positively affected enzyme expression and catalase activity. Morusin showed no antioxidant activity in the CAA assay. Similarly, pomiferin had only mild antioxidant activity and proved rather cytotoxic.